10.5' x 6.0' Single Axle 'Tipper' [Rated @ 1500kg]
AS ADVERTISED!
Key Features
-
Axle Tipper (No ramps needed!)
-
Rated @ 1500kg
-
Carrying Capacity ~1150kg
-
13" Galv Spoke Wheels
-
Weight-rated tyres
-
Matching Spare
-
NZ Made Jockey Wheel
-
TransTex 220 12mm Ply Deck
-
Fold-down / removable front & rear gates
-
Custom folded 2mm sides, gates, guards & light bar
-
NZ Made in Pahiatua!
-
5 Year Structural Warranty!
-
3 Year WOF + 1 Year Rego!
​
$5,625.00 Incl GST
​
Options
Upgrade to 10" Electric Braked Hubs, On-trailer brake controller, Handbrake function
Accessories
600mm removable crate (4 separate sides, held with pins)
950mm removable crate (4 separate sides, held with pins)
950mm removable 'stock' crate [upgraded to a full height sliding rear door]
950mm removable 'stock crate' + 'hinged' wall [creates 2 pens in crate]
​
H-Frames x 2 615 - 1215mm over sides, 100mm Top Extensions, Non-Braced
H-Frames x 2 615 - 1215mm over sides, 100mm Top Extensions, Removable Horizontal Braces
H-Frames x 3 615 - 1215mm over sides, 100mm Top Extensions, Removable Horizontal Braces & Trussing
10.5' x 6.0' Single Axle with Stock Crate + Internal Pen Wall
10.5' x 6.0' SINGLE AXLE TIP TRAILER RATED @ 1500KGs
PERFECT FOR TRANSPORTING YOUR SIDE BY SIDE
DECK DIMENSIONS
3200mm Internal Length
1828mm Internal Width
235mm Deck to top of sides
KEY FEATURES
100% NZ Made with 5 Year Structural Warranty
Hot-Dip Galvanised for superior corrosion resistance
‘Trans-Tex 220’ 12mm Specialty Plywood Deck:
- High 'strength to weight' ratio
- High impact resistance & durability
- Non-Slip ‘wire mesh’ pattern surface
- Waterproof
- Easy clean
- Resistance to most commonly used chemicals
Fabricated from heavy duty 2.0mm NZ Sourced Australasian Standard Steel
75 x 40 x 2.5mm RHS Drawbar
2.0mm Steel Sides & Gates & Custom folded for Extra Strength
Fold-down Front & Rear gates, super handy for those longer loads!
High Quality NZ Sourced ‘TWL’ Suspension, Hubs & Stubs
13" Galvanised Spoke Wheels & Rated Tyres
High quality HELLA Brand L.E.D trailer lights
1 7/8 or 50mm Galv Tow Hitch (1 7/8 by default, please advise if 50mm required)
High Quality Safety Chain
Heavy Duty NZ Made Jockey Wheel
Full sized ‘matching’ spare wheel, mounted low in the drawbar to allow front gate to ‘fold flat’
'Extra strong' 10mm Round-bar Tie Loops AND Hooks welded around the trailer
Many options available, including 600mm & 950mm (above sides) standard crates or stock crates (with optional pen wall).
Customisations by request... please enquire.
Manufactured by Angove Engineering Ltd, Pahiatua
Call us on 06 376 8918
Quality Trailers You Can Count On. Guaranteed!